From 8feb8e41a8172585914eb562213ae69d6d88880a Mon Sep 17 00:00:00 2001 From: redfast00 Date: Thu, 10 Mar 2022 22:09:37 +0100 Subject: [PATCH] Some more info port updates --- src/modules/info_ports/gears.scad | 1095 ------------------------ src/modules/info_ports/info_ports.ino | 95 +- src/modules/info_ports/info_ports.scad | 24 +- 3 files changed, 86 insertions(+), 1128 deletions(-) delete mode 100644 src/modules/info_ports/gears.scad diff --git a/src/modules/info_ports/gears.scad b/src/modules/info_ports/gears.scad deleted file mode 100644 index 2ae4fef..0000000 --- a/src/modules/info_ports/gears.scad +++ /dev/null @@ -1,1095 +0,0 @@ -$fn = 50; - -/* Library for Involute Gears, Screws and Racks - -This library contains the following modules -- rack(modul, length, height, width, pressure_angle=20, helix_angle=0) -- mountable_rack(modul, length, height, width, pressure_angle=20, helix_angle=0, fastners, profile, head) -- herringbone_rack(modul, length, height, width, pressure_angle = 20, helix_angle=45) -- mountable_herringbone_rack(modul, length, height, width, pressure_angle=20, helix_angle=45, fastners, profile, head) -- spur_gear(modul, tooth_number, width, bore, pressure_angle=20, helix_angle=0, optimized=true) -- herringbone_gear(modul, tooth_number, width, bore, pressure_angle=20, helix_angle=0, optimized=true) -- rack_and_pinion (modul, rack_length, gear_teeth, rack_height, gear_bore, width, pressure_angle=20, helix_angle=0, together_built=true, optimized=true) -- ring_gear(modul, tooth_number, width, rim_width, pressure_angle=20, helix_angle=0) -- herringbone_ring_gear(modul, tooth_number, width, rim_width, pressure_angle=20, helix_angle=0) -- planetary_gear(modul, sun_teeth, planet_teeth, number_planets, width, rim_width, bore, pressure_angle=20, helix_angle=0, together_built=true, optimized=true) -- bevel_gear(modul, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle=20, helix_angle=0) -- bevel_herringbone_gear(modul, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle=20, helix_angle=0) -- bevel_gear_pair(modul, gear_teeth, pinion_teeth, axis_angle=90, tooth_width, bore, pressure_angle = 20, helix_angle=0, together_built=true) -- bevel_herringbone_gear_pair(modul, gear_teeth, pinion_teeth, axis_angle=90, tooth_width, bore, pressure_angle = 20, helix_angle=0, together_built=true) -- worm(modul, thread_starts, length, bore, pressure_angle=20, lead_angle=10, together_built=true) -- worm_gear(modul, tooth_number, thread_starts, width, length, worm_bore, gear_bore, pressure_angle=20, lead_angle=0, optimized=true, together_built=true) - -Examples of each module are commented out at the end of this file - -Author: Dr Jörg Janssen -Contributions By: Keith Emery, Chris Spencer -Last Verified On: 1. June 2018 -Version: 2.2 -License: Creative Commons - Attribution, Non Commercial, Share Alike - -Permitted modules according to DIN 780: -0.05 0.06 0.08 0.10 0.12 0.16 -0.20 0.25 0.3 0.4 0.5 0.6 -0.7 0.8 0.9 1 1.25 1.5 -2 2.5 3 4 5 6 -8 10 12 16 20 25 -32 40 50 60 - -*/ - - -// General Variables -pi = 3.14159; -rad = 57.29578; -clearance = 0.05; // clearance between teeth - -/* Converts Radians to Degrees */ -function grad(pressure_angle) = pressure_angle*rad; - -/* Converts Degrees to Radians */ -function radian(pressure_angle) = pressure_angle/rad; - -/* Converts 2D Polar Coordinates to Cartesian - Format: radius, phi; phi = Angle to x-Axis on xy-Plane */ -function polar_to_cartesian(polvect) = [ - polvect[0]*cos(polvect[1]), - polvect[0]*sin(polvect[1]) -]; - -/* Circle Involutes-Function: - Returns the Polar Coordinates of an Involute Circle - r = Radius of the Base Circle - rho = Rolling-angle in Degrees */ -function ev(r,rho) = [ - r/cos(rho), - grad(tan(rho)-radian(rho)) -]; - -/* Sphere-Involutes-Function - Returns the Azimuth Angle of an Involute Sphere - theta0 = Polar Angle of the Cone, where the Cutting Edge of the Large Sphere unrolls the Involute - theta = Polar Angle for which the Azimuth Angle of the Involute is to be calculated */ -function sphere_ev(theta0,theta) = 1/sin(theta0)*acos(cos(theta)/cos(theta0))-acos(tan(theta0)/tan(theta)); - -/* Converts Spherical Coordinates to Cartesian - Format: radius, theta, phi; theta = Angle to z-Axis, phi = Angle to x-Axis on xy-Plane */ -function sphere_to_cartesian(vect) = [ - vect[0]*sin(vect[1])*cos(vect[2]), - vect[0]*sin(vect[1])*sin(vect[2]), - vect[0]*cos(vect[1]) -]; - -/* Check if a Number is even - = 1, if so - = 0, if the Number is not even */ -function is_even(number) = - (number == floor(number/2)*2) ? 1 : 0; - -/* greatest common Divisor - according to Euclidean Algorithm. - Sorting: a must be greater than b */ -function ggt(a,b) = - a%b == 0 ? b : ggt(b,a%b); - -/* Polar function with polar angle and two variables */ -function spiral(a, r0, phi) = - a*phi + r0; - -/* Copy and rotate a Body */ -module copier(vect, number, distance, winkel){ - for(i = [0:number-1]){ - translate(v=vect*distance*i) - rotate(a=i*winkel, v = [0,0,1]) - children(0); - } -} - -/* rack - modul = Height of the Tooth Tip above the Rolling LIne - length = Length of the Rack - height = Height of the Rack to the Pitch Line - width = Width of a Tooth - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle of the Rack Transverse Axis; 0° = Spur Teeth */ -module rack(modul, length, height, width, pressure_angle = 20, helix_angle = 0) { - - // Dimension Calculations - modul=modul*(1-clearance); - c = modul / 6; // Tip Clearance - mx = modul/cos(helix_angle); // Module Shift by Helix Angle in the X-Direction - a = 2*mx*tan(pressure_angle)+c*tan(pressure_angle); // Flank Width - b = pi*mx/2-2*mx*tan(pressure_angle); // Tip Width - x = width*tan(helix_angle); // Topside Shift by Helix Angle in the X-Direction - nz = ceil((length+abs(2*x))/(pi*mx)); // Number of Teeth - - translate([-pi*mx*(nz-1)/2-a-b/2,-modul,0]){ - intersection(){ // Creates a Prism that fits into a Geometric Box - copier([1,0,0], nz, pi*mx, 0){ - polyhedron( - points=[[0,-c,0], [a,2*modul,0], [a+b,2*modul,0], [2*a+b,-c,0], [pi*mx,-c,0], [pi*mx,modul-height,0], [0,modul-height,0], // Underside - [0+x,-c,width], [a+x,2*modul,width], [a+b+x,2*modul,width], [2*a+b+x,-c,width], [pi*mx+x,-c,width], [pi*mx+x,modul-height,width], [0+x,modul-height,width]], // Topside - faces=[[6,5,4,3,2,1,0], // Underside - [1,8,7,0], - [9,8,1,2], - [10,9,2,3], - [11,10,3,4], - [12,11,4,5], - [13,12,5,6], - [7,13,6,0], - [7,8,9,10,11,12,13], // Topside - ] - ); - }; - translate([abs(x),-height+modul-0.5,-0.5]){ - cube([length,height+modul+1,width+1]); // Cuboid which includes the Volume of the Rack - } - }; - }; -} - -/* Mountable-rack; uses module "rack" - modul = Height of the Tooth Tip above the Rolling LIne - length = Length of the Rack - height = Height of the Rack to the Pitch Line - width = Width of a Tooth - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle of the Rack Transverse Axis; 0° = Spur Teeth - fastners = Total number of fastners. - profile = Metric standard profile for fastners (ISO machine screws), M4 = 4, M6 = 6 etc. - - head = Style of fastner to accomodate. - PH = Pan Head, C = Countersunk, RC = Raised Countersunk, CS = Cap Screw, CSS = Countersunk Socket Screw. */ -module mountable_rack(modul, length, height, width, pressure_angle, helix_angle, fastners, profile, head) { - difference(){ - rack(modul, length, height, width, pressure_angle, helix_angle); - offset = (length/fastners); - translate([-length/2+(offset/2),0,0]) - for(i = [0:fastners-1]){ - if (head=="PH"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=profile*0.6+modul*2.25, d=profile*2, center=false); - } - if (head=="CS"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=profile*1.25+modul*2.25, d=profile*1.5, center=false); - } - if (head=="C"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=modul*2.25, d=profile*2, center=false); - translate([i*offset,-modul*1.25,width/2]) - rotate([90,0,0]) - cylinder (h=profile/2, d1=profile*2, d2=profile, center=false); - } - if (head=="RC"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=modul*2.25+profile/4, d=profile*2, center=false); - translate([i*offset,-modul*1.25-profile/4,width/2]) - rotate([90,0,0]) - cylinder (h=profile/2, d1=profile*2, d2=profile, center=false); - } - if (head=="CSS"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=modul*2.25, d=profile*2, center=false); - translate([i*offset,-modul*1.25,width/2]) - rotate([90,0,0]) - cylinder (h=profile*0.6, d1=profile*2, d2=profile, center=false); - } - } - } - } - -/* Spur gear - modul = Height of the Tooth Tip beyond the Pitch Circle - tooth_number = Number of Gear Teeth - width = tooth_width - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle to the Axis of Rotation; 0° = Spur Teeth - optimized = Create holes for Material-/Weight-Saving or Surface Enhancements where Geometry allows */ -module spur_gear(modul, tooth_number, width, bore, pressure_angle = 20, helix_angle = 0, optimized = true) { - - // Dimension Calculations - d = modul * tooth_number; // Pitch Circle Diameter - r = d / 2; // Pitch Circle Radius - alpha_spur = atan(tan(pressure_angle)/cos(helix_angle));// Helix Angle in Transverse Section - db = d * cos(alpha_spur); // Base Circle Diameter - rb = db / 2; // Base Circle Radius - da = (modul <1)? d + modul * 2.2 : d + modul * 2; // Tip Diameter according to DIN 58400 or DIN 867 - ra = da / 2; // Tip Circle Radius - c = (tooth_number <3)? 0 : modul/6; // Tip Clearance - df = d - 2 * (modul + c); // Root Circle Diameter - rf = df / 2; // Root Radius - rho_ra = acos(rb/ra); // Maximum Rolling Angle; - // Involute begins on the Base Circle and ends at the Tip Circle - rho_r = acos(rb/r); // Rolling Angle at Pitch Circle; - // Involute begins on the Base Circle and ends at the Tip Circle - phi_r = grad(tan(rho_r)-radian(rho_r)); // Angle to Point of Involute on Pitch Circle - gamma = rad*width/(r*tan(90-helix_angle)); // Torsion Angle for Extrusion - step = rho_ra/16; // Involute is divided into 16 pieces - tau = 360/tooth_number; // Pitch Angle - - r_hole = (2*rf - bore)/8; // Radius of Holes for Material-/Weight-Saving - rm = bore/2+2*r_hole; // Distance of the Axes of the Holes from the Main Axis - z_hole = floor(2*pi*rm/(3*r_hole)); // Number of Holes for Material-/Weight-Saving - - optimized = (optimized && r >= width*1.5 && d > 2*bore); // is Optimization useful? - - // Drawing - union(){ - rotate([0,0,-phi_r-90*(1-clearance)/tooth_number]){ // Center Tooth on X-Axis; - // Makes Alignment with other Gears easier - - linear_extrude(height = width, twist = gamma){ - difference(){ - union(){ - tooth_width = (180*(1-clearance))/tooth_number+2*phi_r; - circle(rf); // Root Circle - for (rot = [0:tau:360]){ - rotate (rot){ // Copy and Rotate "Number of Teeth" - polygon(concat( // Tooth - [[0,0]], // Tooth Segment starts and ends at Origin - [for (rho = [0:step:rho_ra]) // From zero Degrees (Base Circle) - // To Maximum Involute Angle (Tip Circle) - polar_to_cartesian(ev(rb,rho))], // First Involute Flank - - [polar_to_cartesian(ev(rb,rho_ra))], // Point of Involute on Tip Circle - - [for (rho = [rho_ra:-step:0]) // of Maximum Involute Angle (Tip Circle) - // to zero Degrees (Base Circle) - polar_to_cartesian([ev(rb,rho)[0], tooth_width-ev(rb,rho)[1]])] - // Second Involute Flank - // (180*(1-clearance)) instead of 180 Degrees, - // to allow clearance of the Flanks - ) - ); - } - } - } - circle(r = rm+r_hole*1.49); // "bore" - } - } - } - // with Material Savings - if (optimized) { - linear_extrude(height = width){ - difference(){ - circle(r = (bore+r_hole)/2); - circle(r = bore/2); // bore - } - } - linear_extrude(height = (width-r_hole/2 < width*2/3) ? width*2/3 : width-r_hole/2){ - difference(){ - circle(r=rm+r_hole*1.51); - union(){ - circle(r=(bore+r_hole)/2); - for (i = [0:1:z_hole]){ - translate(sphere_to_cartesian([rm,90,i*360/z_hole])) - circle(r = r_hole); - } - } - } - } - } - // without Material Savings - else { - linear_extrude(height = width){ - difference(){ - circle(r = rm+r_hole*1.51); - circle(r = bore/2); - } - } - } - } -} - -/* Herringbone_rack; uses the module "rack" - modul = Height of the Tooth Tip above the Rolling LIne - length = Length of the Rack - height = Height of the Rack to the Pitch Line - width = Width of a Tooth - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle of the Rack Transverse Axis; 0° = Spur Teeth */ -module herringbone_rack(modul, length, height, width, pressure_angle = 20, helix_angle) { - width = width/2; - translate([0,0,width]){ - union(){ - rack(modul, length, height, width, pressure_angle, helix_angle); // bottom Half - mirror([0,0,1]){ - rack(modul, length, height, width, pressure_angle, helix_angle); // top Half - } - } - } -} - -/* Mountable_herringbone_rack; uses module "herringbone_rack" - modul = Height of the Tooth Tip above the Rolling LIne - length = Length of the Rack - height = Height of the Rack to the Pitch Line - width = Width of a Tooth - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle of the Rack Transverse Axis; 0° = Spur Teeth - fastners = Total number of fastners. - profile = Metric standard profile for fastners (ISO machine screws), M4 = 4, M6 = 6 etc. - - head = Style of fastner to accomodate. - PH = Pan Head, C = Countersunk, RC = Raised Countersunk, CS = Cap Screw, CSS = Countersunk Socket Screw. */ -module mountable_herringbone_rack(modul, length, height, width, pressure_angle, helix_angle, fastners, profile, head) { - difference(){ - herringbone_rack(modul, length, height, width, pressure_angle, helix_angle); - offset = (length/fastners); - translate([-length/2+(offset/2),0,0]) - for(i = [0:fastners-1]){ - if (head=="PH"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=profile*0.6+modul*2.25, d=profile*2, center=false); - } - if (head=="CS"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=profile*1.25+modul*2.25, d=profile*1.5, center=false); - } - if (head=="C"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=modul*2.25, d=profile*2, center=false); - translate([i*offset,-modul*1.25,width/2]) - rotate([90,0,0]) - cylinder (h=profile/2, d1=profile*2, d2=profile, center=false); - } - if (head=="RC"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=modul*2.25+profile/4, d=profile*2, center=false); - translate([i*offset,-modul*1.25-profile/4,width/2]) - rotate([90,0,0]) - cylinder (h=profile/2, d1=profile*2, d2=profile, center=false); - } - if (head=="CSS"){ - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=height+modul, d=profile, center=false); - translate([i*offset,modul,width/2]) - rotate([90,0,0]) - cylinder(h=modul*2.25, d=profile*2, center=false); - translate([i*offset,-modul*1.25,width/2]) - rotate([90,0,0]) - cylinder (h=profile*0.6, d1=profile*2, d2=profile, center=false); - } - } - } - } - -/* Herringbone_gear; uses the module "spur_gear" - modul = Height of the Tooth Tip beyond the Pitch Circle - tooth_number = Number of Gear Teeth - width = tooth_width - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle to the Axis of Rotation, Standard = 0° (Spur Teeth) - optimized = Holes for Material-/Weight-Saving */ -module herringbone_gear(modul, tooth_number, width, bore, pressure_angle = 20, helix_angle=0, optimized=true){ - - width = width/2; - d = modul * tooth_number; // Pitch Circle Diameter - r = d / 2; // Pitch Circle Radius - c = (tooth_number <3)? 0 : modul/6; // Tip Clearance - - df = d - 2 * (modul + c); // Root Circle Diameter - rf = df / 2; // Root Radius - - r_hole = (2*rf - bore)/8; // Radius of Holes for Material-/Weight-Saving - rm = bore/2+2*r_hole; // Distance of the Axes of the Holes from the Main Axis - z_hole = floor(2*pi*rm/(3*r_hole)); // Number of Holes for Material-/Weight-Saving - - optimized = (optimized && r >= width*3 && d > 2*bore); // is Optimization useful? - - translate([0,0,width]){ - union(){ - spur_gear(modul, tooth_number, width, 2*(rm+r_hole*1.49), pressure_angle, helix_angle, false); // bottom Half - mirror([0,0,1]){ - spur_gear(modul, tooth_number, width, 2*(rm+r_hole*1.49), pressure_angle, helix_angle, false); // top Half - } - } - } - // with Material Savings - if (optimized) { - linear_extrude(height = width*2){ - difference(){ - circle(r = (bore+r_hole)/2); - circle(r = bore/2); // bore - } - } - linear_extrude(height = (2*width-r_hole/2 < 1.33*width) ? 1.33*width : 2*width-r_hole/2){ //width*4/3 - difference(){ - circle(r=rm+r_hole*1.51); - union(){ - circle(r=(bore+r_hole)/2); - for (i = [0:1:z_hole]){ - translate(sphere_to_cartesian([rm,90,i*360/z_hole])) - circle(r = r_hole); - } - } - } - } - } - // without Material Savings - else { - linear_extrude(height = width*2){ - difference(){ - circle(r = rm+r_hole*1.51); - circle(r = bore/2); - } - } - } -} - -/* Rack and Pinion - modul = Height of the Tooth Tip beyond the Pitch Circle - rack_length = Length of the Rack - gear_teeth = Number of Gear Teeth - rack_height = Height of the Rack to the Pitch Line - gear_bore = Diameter of the Center Hole of the Spur Gear - width = Width of a Tooth - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle to the Axis of Rotation, Standard = 0° (Spur Teeth) */ -module rack_and_pinion (modul, rack_length, gear_teeth, rack_height, gear_bore, width, pressure_angle=20, helix_angle=0, together_built=true, optimized=true) { - - distance = together_built? modul*gear_teeth/2 : modul*gear_teeth; - - rack(modul, rack_length, rack_height, width, pressure_angle, -helix_angle); - translate([0,distance,0]) - rotate(a=360/gear_teeth) - spur_gear (modul, gear_teeth, width, gear_bore, pressure_angle, helix_angle, optimized); -} - -/* Ring gear - modul = Height of the Tooth Tip beyond the Pitch Circle - tooth_number = Number of Gear Teeth - width = tooth_width - rim_width = Width of the Rim from the Root Circle - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle to the Axis of Rotation, Standard = 0° (Spur Teeth) */ -module ring_gear(modul, tooth_number, width, rim_width, pressure_angle = 20, helix_angle = 0) { - - // Dimension Calculations - ha = (tooth_number >= 20) ? 0.02 * atan((tooth_number/15)/pi) : 0.6; // Shortening Factor of Tooth Head Height - d = modul * tooth_number; // Pitch Circle Diameter - r = d / 2; // Pitch Circle Radius - alpha_spur = atan(tan(pressure_angle)/cos(helix_angle));// Helix Angle in Transverse Section - db = d * cos(alpha_spur); // Base Circle Diameter - rb = db / 2; // Base Circle Radius - c = modul / 6; // Tip Clearance - da = (modul <1)? d + (modul+c) * 2.2 : d + (modul+c) * 2; // Tip Diameter - ra = da / 2; // Tip Circle Radius - df = d - 2 * modul * ha; // Root Circle Diameter - rf = df / 2; // Root Radius - rho_ra = acos(rb/ra); // Maximum Involute Angle; - // Involute begins on the Base Circle and ends at the Tip Circle - rho_r = acos(rb/r); // Involute Angle at Pitch Circle; - // Involute begins on the Base Circle and ends at the Tip Circle - phi_r = grad(tan(rho_r)-radian(rho_r)); // Angle to Point of Involute on Pitch Circle - gamma = rad*width/(r*tan(90-helix_angle)); // Torsion Angle for Extrusion - step = rho_ra/16; // Involute is divided into 16 pieces - tau = 360/tooth_number; // Pitch Angle - - // Drawing - rotate([0,0,-phi_r-90*(1+clearance)/tooth_number]) // Center Tooth on X-Axis; - // Makes Alignment with other Gears easier - linear_extrude(height = width, twist = gamma){ - difference(){ - circle(r = ra + rim_width); // Outer Circle - union(){ - tooth_width = (180*(1+clearance))/tooth_number+2*phi_r; - circle(rf); // Root Circle - for (rot = [0:tau:360]){ - rotate (rot) { // Copy and Rotate "Number of Teeth" - polygon( concat( - [[0,0]], - [for (rho = [0:step:rho_ra]) // From zero Degrees (Base Circle) - // to Maximum Involute Angle (Tip Circle) - polar_to_cartesian(ev(rb,rho))], - [polar_to_cartesian(ev(rb,rho_ra))], - [for (rho = [rho_ra:-step:0]) // von Maximum Involute Angle (Kopfkreis) - // to zero Degrees (Base Circle) - polar_to_cartesian([ev(rb,rho)[0], tooth_width-ev(rb,rho)[1]])] - // (180*(1+clearance)) statt 180, - // to allow clearance of the Flanks - ) - ); - } - } - } - } - } - - echo("Ring Gear Outer Diamater = ", 2*(ra + rim_width)); - -} - -/* Herringbone Ring Gear; uses the Module "ring_gear" - modul = Height of the Tooth Tip over the Partial Cone - tooth_number = Number of Gear Teeth - width = tooth_width - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle to the Axis of Rotation, Standard = 0° (Spur Teeth) */ -module herringbone_ring_gear(modul, tooth_number, width, rim_width, pressure_angle = 20, helix_angle = 0) { - - width = width / 2; - translate([0,0,width]) - union(){ - ring_gear(modul, tooth_number, width, rim_width, pressure_angle, helix_angle); // bottom Half - mirror([0,0,1]) - ring_gear(modul, tooth_number, width, rim_width, pressure_angle, helix_angle); // top Half - } -} - -/* Planetary Gear; uses the Modules "herringbone_gear" and "herringbone_ring_gear" - modul = Height of the Tooth Tip over the Partial Cone - sun_teeth = Number of Teeth of the Sun Gear - planet_teeth = Number of Teeth of a Planet Gear - number_planets = Number of Planet Gears. If null, the Function will calculate the Minimum Number - width = tooth_width - rim_width = Width of the Rim from the Root Circle - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle to the Axis of Rotation, Standard = 0° (Spur Teeth) - together_built = - optimized = Create holes for Material-/Weight-Saving or Surface Enhancements where Geometry allows - together_built = Components assembled for Construction or separated for 3D-Printing */ -module planetary_gear(modul, sun_teeth, planet_teeth, number_planets, width, rim_width, bore, pressure_angle=20, helix_angle=0, together_built=true, optimized=true){ - - // Dimension Calculations - d_sun = modul*sun_teeth; // Sun Pitch Circle Diameter - d_planet = modul*planet_teeth; // Planet Pitch Circle Diameter - center_distance = modul*(sun_teeth + planet_teeth) / 2; // Distance from Sun- or Ring-Gear Axis to Planet Axis - ring_teeth = sun_teeth + 2*planet_teeth; // Number of Teeth of the Ring Gear - d_ring = modul*ring_teeth; // Ring Pitch Circle Diameter - - rotate = is_even(planet_teeth); // Does the Sun Gear need to be rotated? - - n_max = floor(180/asin(modul*(planet_teeth)/(modul*(sun_teeth + planet_teeth)))); - // Number of Planet Gears: at most as many as possible without overlap - - // Drawing - rotate([0,0,180/sun_teeth*rotate]){ - herringbone_gear (modul, sun_teeth, width, bore, pressure_angle, -helix_angle, optimized); // Sun Gear - } - - if (together_built){ - if(number_planets==0){ - list = [ for (n=[2 : 1 : n_max]) if ((((ring_teeth+sun_teeth)/n)==floor((ring_teeth+sun_teeth)/n))) n]; - number_planets = list[0]; // Determine Number of Planet Gears - center_distance = modul*(sun_teeth + planet_teeth)/2; // Distance from Sun- / Ring-Gear Axis - for(n=[0:1:number_planets-1]){ - translate(sphere_to_cartesian([center_distance,90,360/number_planets*n])) - rotate([0,0,n*360*d_sun/d_planet]) - herringbone_gear (modul, planet_teeth, width, bore, pressure_angle, helix_angle); // Planet Gears - } - } - else{ - center_distance = modul*(sun_teeth + planet_teeth)/2; // Distance from Sun- / Ring-Gear Axis - for(n=[0:1:number_planets-1]){ - translate(sphere_to_cartesian([center_distance,90,360/number_planets*n])) - rotate([0,0,n*360*d_sun/(d_planet)]) - herringbone_gear (modul, planet_teeth, width, bore, pressure_angle, helix_angle); // Planet Gears - } - } - } - else{ - planet_distance = ring_teeth*modul/2+rim_width+d_planet; // Distance between Planets - for(i=[-(number_planets-1):2:(number_planets-1)]){ - translate([planet_distance, d_planet*i,0]) - herringbone_gear (modul, planet_teeth, width, bore, pressure_angle, helix_angle); // Planet Gears - } - } - - herringbone_ring_gear (modul, ring_teeth, width, rim_width, pressure_angle, helix_angle); // Ring Gear - -} - -/* Bevel Gear - modul = Height of the Tooth Tip over the Partial Cone; Specification for the Outside of the Cone - tooth_number = Number of Gear Teeth - partial_cone_angle = (Half)angle of the Cone on which the other Ring Gear rolls - tooth_width = Width of the Teeth from the Outside toward the apex of the Cone - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle, Standard = 0° */ -module bevel_gear(modul, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle = 20, helix_angle=0) { - - // Dimension Calculations - d_outside = modul * tooth_number; // Part Cone Diameter at the Cone Base, - // corresponds to the Chord in a Spherical Section - r_outside = d_outside / 2; // Part Cone Radius at the Cone Base - rg_outside = r_outside/sin(partial_cone_angle); // Large-Cone Radius for Outside-Tooth, corresponds to the Length of the Cone-Flank; - rg_inside = rg_outside - tooth_width; // Large-Cone Radius for Inside-Tooth - r_inside = r_outside*rg_inside/rg_outside; - alpha_spur = atan(tan(pressure_angle)/cos(helix_angle));// Helix Angle in Transverse Section - delta_b = asin(cos(alpha_spur)*sin(partial_cone_angle)); // Base Cone Angle - da_outside = (modul <1)? d_outside + (modul * 2.2) * cos(partial_cone_angle): d_outside + modul * 2 * cos(partial_cone_angle); - ra_outside = da_outside / 2; - delta_a = asin(ra_outside/rg_outside); - c = modul / 6; // Tip Clearance - df_outside = d_outside - (modul +c) * 2 * cos(partial_cone_angle); - rf_outside = df_outside / 2; - delta_f = asin(rf_outside/rg_outside); - rkf = rg_outside*sin(delta_f); // Radius of the Cone Foot - height_f = rg_outside*cos(delta_f); // Height of the Cone from the Root Cone - - echo("Part Cone Diameter at the Cone Base = ", d_outside); - - // Sizes for Complementary Truncated Cone - height_k = (rg_outside-tooth_width)/cos(partial_cone_angle); // Height of the Complementary Cone for corrected Tooth Length - rk = (rg_outside-tooth_width)/sin(partial_cone_angle); // Foot Radius of the Complementary Cone - rfk = rk*height_k*tan(delta_f)/(rk+height_k*tan(delta_f)); // Tip Radius of the Cylinders for - // Complementary Truncated Cone - height_fk = rk*height_k/(height_k*tan(delta_f)+rk); // height of the Complementary Truncated Cones - - echo("Bevel Gear Height = ", height_f-height_fk); - - phi_r = sphere_ev(delta_b, partial_cone_angle); // Angle to Point of Involute on Partial Cone - - // Torsion Angle gamma from Helix Angle - gamma_g = 2*atan(tooth_width*tan(helix_angle)/(2*rg_outside-tooth_width)); - gamma = 2*asin(rg_outside/r_outside*sin(gamma_g/2)); - - step = (delta_a - delta_b)/16; - tau = 360/tooth_number; // Pitch Angle - start = (delta_b > delta_f) ? delta_b : delta_f; - mirrpoint = (180*(1-clearance))/tooth_number+2*phi_r; - - // Drawing - rotate([0,0,phi_r+90*(1-clearance)/tooth_number]){ // Center Tooth on X-Axis; - // Makes Alignment with other Gears easier - translate([0,0,height_f]) rotate(a=[0,180,0]){ - union(){ - translate([0,0,height_f]) rotate(a=[0,180,0]){ // Truncated Cone - difference(){ - linear_extrude(height=height_f-height_fk, scale=rfk/rkf) circle(rkf*1.001); // 1 permille Overlap with Tooth Root - translate([0,0,-1]){ - cylinder(h = height_f-height_fk+2, r = bore/2); // bore - } - } - } - for (rot = [0:tau:360]){ - rotate (rot) { // Copy and Rotate "Number of Teeth" - union(){ - if (delta_b > delta_f){ - // Tooth Root - flankpoint_under = 1*mirrpoint; - flankpoint_over = sphere_ev(delta_f, start); - polyhedron( - points = [ - sphere_to_cartesian([rg_outside, start*1.001, flankpoint_under]), // 1 permille Overlap with Tooth - sphere_to_cartesian([rg_inside, start*1.001, flankpoint_under+gamma]), - sphere_to_cartesian([rg_inside, start*1.001, mirrpoint-flankpoint_under+gamma]), - sphere_to_cartesian([rg_outside, start*1.001, mirrpoint-flankpoint_under]), - sphere_to_cartesian([rg_outside, delta_f, flankpoint_under]), - sphere_to_cartesian([rg_inside, delta_f, flankpoint_under+gamma]), - sphere_to_cartesian([rg_inside, delta_f, mirrpoint-flankpoint_under+gamma]), - sphere_to_cartesian([rg_outside, delta_f, mirrpoint-flankpoint_under]) - ], - faces = [[0,1,2],[0,2,3],[0,4,1],[1,4,5],[1,5,2],[2,5,6],[2,6,3],[3,6,7],[0,3,7],[0,7,4],[4,6,5],[4,7,6]], - convexity =1 - ); - } - // Tooth - for (delta = [start:step:delta_a-step]){ - flankpoint_under = sphere_ev(delta_b, delta); - flankpoint_over = sphere_ev(delta_b, delta+step); - polyhedron( - points = [ - sphere_to_cartesian([rg_outside, delta, flankpoint_under]), - sphere_to_cartesian([rg_inside, delta, flankpoint_under+gamma]), - sphere_to_cartesian([rg_inside, delta, mirrpoint-flankpoint_under+gamma]), - sphere_to_cartesian([rg_outside, delta, mirrpoint-flankpoint_under]), - sphere_to_cartesian([rg_outside, delta+step, flankpoint_over]), - sphere_to_cartesian([rg_inside, delta+step, flankpoint_over+gamma]), - sphere_to_cartesian([rg_inside, delta+step, mirrpoint-flankpoint_over+gamma]), - sphere_to_cartesian([rg_outside, delta+step, mirrpoint-flankpoint_over]) - ], - faces = [[0,1,2],[0,2,3],[0,4,1],[1,4,5],[1,5,2],[2,5,6],[2,6,3],[3,6,7],[0,3,7],[0,7,4],[4,6,5],[4,7,6]], - convexity =1 - ); - } - } - } - } - } - } - } -} - -/* Bevel Herringbone Gear; uses the Module "bevel_gear" - modul = Height of the Tooth Tip beyond the Pitch Circle - tooth_number = Number of Gear Teeth - partial_cone_angle, tooth_width - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle, Standard = 0° */ -module bevel_herringbone_gear(modul, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle = 20, helix_angle=0){ - - // Dimension Calculations - - tooth_width = tooth_width / 2; - - d_outside = modul * tooth_number; // Part Cone Diameter at the Cone Base, - // corresponds to the Chord in a Spherical Section - r_outside = d_outside / 2; // Part Cone Radius at the Cone Base - rg_outside = r_outside/sin(partial_cone_angle); // Large-Cone Radius, corresponds to the Length of the Cone-Flank; - c = modul / 6; // Tip Clearance - df_outside = d_outside - (modul +c) * 2 * cos(partial_cone_angle); - rf_outside = df_outside / 2; - delta_f = asin(rf_outside/rg_outside); - height_f = rg_outside*cos(delta_f); // Height of the Cone from the Root Cone - - // Torsion Angle gamma from Helix Angle - gamma_g = 2*atan(tooth_width*tan(helix_angle)/(2*rg_outside-tooth_width)); - gamma = 2*asin(rg_outside/r_outside*sin(gamma_g/2)); - - echo("Part Cone Diameter at the Cone Base = ", d_outside); - - // Sizes for Complementary Truncated Cone - height_k = (rg_outside-tooth_width)/cos(partial_cone_angle); // Height of the Complementary Cone for corrected Tooth Length - rk = (rg_outside-tooth_width)/sin(partial_cone_angle); // Foot Radius of the Complementary Cone - rfk = rk*height_k*tan(delta_f)/(rk+height_k*tan(delta_f)); // Tip Radius of the Cylinders for - // Complementary Truncated Cone - height_fk = rk*height_k/(height_k*tan(delta_f)+rk); // height of the Complementary Truncated Cones - - modul_inside = modul*(1-tooth_width/rg_outside); - - union(){ - bevel_gear(modul, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle, helix_angle); // bottom Half - translate([0,0,height_f-height_fk]) - rotate(a=-gamma,v=[0,0,1]) - bevel_gear(modul_inside, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle, -helix_angle); // top Half - } -} - -/* Spiral Bevel Gear; uses the Module "bevel_gear" - modul = Height of the Tooth Tip beyond the Pitch Circle - tooth_number = Number of Gear Teeth - height = Height of Gear Teeth - bore = Diameter of the Center Hole - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle, Standard = 0° */ -module spiral_bevel_gear(modul, tooth_number, partial_cone_angle, tooth_width, bore, pressure_angle = 20, helix_angle=30){ - - steps = 16; - - // Dimension Calculations - - b = tooth_width / steps; - d_outside = modul * tooth_number; // Part Cone Diameter at the Cone Base, - // corresponds to the Chord in a Spherical Section - r_outside = d_outside / 2; // Part Cone Radius at the Cone Base - rg_outside = r_outside/sin(partial_cone_angle); // Large-Cone Radius, corresponds to the Length of the Cone-Flank; - rg_center = rg_outside-tooth_width/2; - - echo("Part Cone Diameter at the Cone Base = ", d_outside); - - a=tan(helix_angle)/rg_center; - - union(){ - for(i=[0:1:steps-1]){ - r = rg_outside-i*b; - helix_angle = a*r; - modul_r = modul-b*i/rg_outside; - translate([0,0,b*cos(partial_cone_angle)*i]) - - rotate(a=-helix_angle*i,v=[0,0,1]) - bevel_gear(modul_r, tooth_number, partial_cone_angle, b, bore, pressure_angle, helix_angle); // top Half - } - } -} - -/* Bevel Gear Pair with any axis_angle; uses the Module "bevel_gear" - modul = Height of the Tooth Tip over the Partial Cone; Specification for the Outside of the Cone - gear_teeth = Number of Gear Teeth on the Gear - pinion_teeth = Number of Gear Teeth on the Pinion - axis_angle = Angle between the Axles of the Gear and Pinion - tooth_width = Width of the Teeth from the Outside toward the apex of the Cone - gear_bore = Diameter of the Center Hole of the Gear - pinion_bore = Diameter of the Center Bore of the Gear - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle, Standard = 0° - together_built = Components assembled for Construction or separated for 3D-Printing */ -module bevel_gear_pair(modul, gear_teeth, pinion_teeth, axis_angle=90, tooth_width, gear_bore, pinion_bore, pressure_angle=20, helix_angle=0, together_built=true){ - - // Dimension Calculations - r_gear = modul*gear_teeth/2; // Cone Radius of the Gear - delta_gear = atan(sin(axis_angle)/(pinion_teeth/gear_teeth+cos(axis_angle))); // Cone Angle of the Gear - delta_pinion = atan(sin(axis_angle)/(gear_teeth/pinion_teeth+cos(axis_angle)));// Cone Angle of the Pinion - rg = r_gear/sin(delta_gear); // Radius of the Large Sphere - c = modul / 6; // Tip Clearance - df_pinion = pi*rg*delta_pinion/90 - 2 * (modul + c); // Bevel Diameter on the Large Sphere - rf_pinion = df_pinion / 2; // Root Cone Radius on the Large Sphere - delta_f_pinion = rf_pinion/(pi*rg) * 180; // Tip Cone Angle - rkf_pinion = rg*sin(delta_f_pinion); // Radius of the Cone Foot - height_f_pinion = rg*cos(delta_f_pinion); // Height of the Cone from the Root Cone - - echo("Cone Angle Gear = ", delta_gear); - echo("Cone Angle Pinion = ", delta_pinion); - - df_gear = pi*rg*delta_gear/90 - 2 * (modul + c); // Bevel Diameter on the Large Sphere - rf_gear = df_gear / 2; // Root Cone Radius on the Large Sphere - delta_f_gear = rf_gear/(pi*rg) * 180; // Tip Cone Angle - rkf_gear = rg*sin(delta_f_gear); // Radius of the Cone Foot - height_f_gear = rg*cos(delta_f_gear); // Height of the Cone from the Root Cone - - echo("Gear Height = ", height_f_gear); - echo("Pinion Height = ", height_f_pinion); - - rotate = is_even(pinion_teeth); - - // Drawing - // Rad - rotate([0,0,180*(1-clearance)/gear_teeth*rotate]) - bevel_gear(modul, gear_teeth, delta_gear, tooth_width, gear_bore, pressure_angle, helix_angle); - - // Ritzel - if (together_built) - translate([-height_f_pinion*cos(90-axis_angle),0,height_f_gear-height_f_pinion*sin(90-axis_angle)]) - rotate([0,axis_angle,0]) - bevel_gear(modul, pinion_teeth, delta_pinion, tooth_width, pinion_bore, pressure_angle, -helix_angle); - else - translate([rkf_pinion*2+modul+rkf_gear,0,0]) - bevel_gear(modul, pinion_teeth, delta_pinion, tooth_width, pinion_bore, pressure_angle, -helix_angle); - } - -/* Herringbone Bevel Gear Pair with arbitrary axis_angle; uses the Module "bevel_herringbone_gear" - modul = Height of the Tooth Tip over the Partial Cone; Specification for the Outside of the Cone - gear_teeth = Number of Gear Teeth on the Gear - pinion_teeth = Number of Gear Teeth on the Pinion - axis_angle = Angle between the Axles of the Gear and Pinion - tooth_width = Width of the Teeth from the Outside toward the apex of the Cone - gear_bore = Diameter of the Center Hole of the Gear - pinion_bore = Diameter of the Center Bore of the Gear - pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. - helix_angle = Helix Angle, Standard = 0° - together_built = Components assembled for Construction or separated for 3D-Printing */ -module bevel_herringbone_gear_pair(modul, gear_teeth, pinion_teeth, axis_angle=90, tooth_width, gear_bore, pinion_bore, pressure_angle = 20, helix_angle=10, together_built=true){ - - r_gear = modul*gear_teeth/2; // Cone Radius of the Gear - delta_gear = atan(sin(axis_angle)/(pinion_teeth/gear_teeth+cos(axis_angle))); // Cone Angle of the Gear - delta_pinion = atan(sin(axis_angle)/(gear_teeth/pinion_teeth+cos(axis_angle)));// Cone Angle of the Pinion - rg = r_gear/sin(delta_gear); // Radius of the Large Sphere - c = modul / 6; // Tip Clearance - df_pinion = pi*rg*delta_pinion/90 - 2 * (modul + c); // Bevel Diameter on the Large Sphere - rf_pinion = df_pinion / 2; // Root Cone Radius on the Large Sphere - delta_f_pinion = rf_pinion/(pi*rg) * 180; // Tip Cone Angle - rkf_pinion = rg*sin(delta_f_pinion); // Radius of the Cone Foot - height_f_pinion = rg*cos(delta_f_pinion); // Height of the Cone from the Root Cone - - echo("Cone Angle Gear = ", delta_gear); - echo("Cone Angle Pinion = ", delta_pinion); - - df_gear = pi*rg*delta_gear/90 - 2 * (modul + c); // Bevel Diameter on the Large Sphere - rf_gear = df_gear / 2; // Root Cone Radius on the Large Sphere - delta_f_gear = rf_gear/(pi*rg) * 180; // Tip Cone Angle - rkf_gear = rg*sin(delta_f_gear); // Radius of the Cone Foot - height_f_gear = rg*cos(delta_f_gear); // Height of the Cone from the Root Cone - - echo("Gear Height = ", height_f_gear); - echo("Pinion Height = ", height_f_pinion); - - rotate = is_even(pinion_teeth); - - // Gear - rotate([0,0,180*(1-clearance)/gear_teeth*rotate]) - bevel_herringbone_gear(modul, gear_teeth, delta_gear, tooth_width, gear_bore, pressure_angle, helix_angle); - - // Pinion - if (together_built) - translate([-height_f_pinion*cos(90-axis_angle),0,height_f_gear-height_f_pinion*sin(90-axis_angle)]) - rotate([0,axis_angle,0]) - bevel_herringbone_gear(modul, pinion_teeth, delta_pinion, tooth_width, pinion_bore, pressure_angle, -helix_angle); - else - translate([rkf_pinion*2+modul+rkf_gear,0,0]) - bevel_herringbone_gear(modul, pinion_teeth, delta_pinion, tooth_width, pinion_bore, pressure_angle, -helix_angle); - -} - -/* -Archimedean screw. -modul = Height of the Screw Head over the Part Cylinder -thread_starts = Number of Starts (Threads) of the Worm -length = Length of the Worm -bore = Diameter of the Center Hole -pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. -lead_angle = Lead Angle of the Worm, corresponds to 90° minus Helix Angle. Positive Lead Angle = clockwise. -together_built = Components assembled for Construction or separated for 3D-Printing */ -module worm(modul, thread_starts, length, bore, pressure_angle=20, lead_angle, together_built=true){ - - // Dimension Calculations - c = modul / 6; // Tip Clearance - r = modul*thread_starts/(2*sin(lead_angle)); // Part-Cylinder Radius - rf = r - modul - c; // Root-Cylinder Radius - a = modul*thread_starts/(90*tan(pressure_angle)); // Spiralparameter - tau_max = 180/thread_starts*tan(pressure_angle); // Angle from Foot to Tip in the Normal Plane - gamma = -rad*length/((rf+modul+c)*tan(lead_angle)); // Torsion Angle for Extrusion - - step = tau_max/16; - - // Drawing: Extrude with a Twist a Surface enclosed by two Archimedean Spirals - if (together_built) { - rotate([0,0,tau_max]){ - linear_extrude(height = length, center = false, convexity = 10, twist = gamma){ - difference(){ - union(){ - for(i=[0:1:thread_starts-1]){ - polygon( - concat( - [[0,0]], - - // rising Tooth Flank - [for (tau = [0:step:tau_max]) - polar_to_cartesian([spiral(a, rf, tau), tau+i*(360/thread_starts)])], - - // Tooth Tip - [for (tau = [tau_max:step:180/thread_starts]) - polar_to_cartesian([spiral(a, rf, tau_max), tau+i*(360/thread_starts)])], - - // descending Tooth Flank - [for (tau = [180/thread_starts:step:(180/thread_starts+tau_max)]) - polar_to_cartesian([spiral(a, rf, 180/thread_starts+tau_max-tau), tau+i*(360/thread_starts)])] - ) - ); - } - circle(rf); - } - circle(bore/2); // Mittelbohrung - } - } - } - } - else { - difference(){ - union(){ - translate([1,r*1.5,0]){ - rotate([90,0,90]) - worm(modul, thread_starts, length, bore, pressure_angle, lead_angle, together_built=true); - } - translate([length+1,-r*1.5,0]){ - rotate([90,0,-90]) - worm(modul, thread_starts, length, bore, pressure_angle, lead_angle, together_built=true); - } - } - translate([length/2+1,0,-(r+modul+1)/2]){ - cube([length+2,3*r+2*(r+modul+1),r+modul+1], center = true); - } - } - } -} - -/* -Calculates a worm wheel set. The worm wheel is an ordinary spur gear without globoidgeometry. -modul = Height of the screw head above the partial cylinder or the tooth head above the pitch circle -tooth_number = Number of wheel teeth -thread_starts = Number of gears (teeth) of the screw -width = tooth_width -length = Length of the Worm -worm_bore = Diameter of the Center Hole of the Worm -gear_bore = Diameter of the Center Hole of the Spur Gear -pressure_angle = Pressure Angle, Standard = 20° according to DIN 867. Should not exceed 45°. -lead_angle = Pitch angle of the worm corresponds to 90 ° bevel angle. Positive slope angle = clockwise. -optimized = Holes for material / weight savings -together_built = Components assembled for construction or apart for 3D printing */ -module worm_gear(modul, tooth_number, thread_starts, width, length, worm_bore, gear_bore, pressure_angle=20, lead_angle, optimized=true, together_built=true, show_spur=1, show_worm=1){ - - c = modul / 6; // Tip Clearance - r_worm = modul*thread_starts/(2*sin(lead_angle)); // Worm Part-Cylinder Radius - r_gear = modul*tooth_number/2; // Spur Gear Part-Cone Radius - rf_worm = r_worm - modul - c; // Root-Cylinder Radius - gamma = -90*width*sin(lead_angle)/(pi*r_gear); // Spur Gear Rotation Angle - tooth_distance = modul*pi/cos(lead_angle); // Tooth Spacing in Transverse Section - x = is_even(thread_starts)? 0.5 : 1; - - if (together_built) { - if(show_worm) - translate([r_worm,(ceil(length/(2*tooth_distance))-x)*tooth_distance,0]) - rotate([90,180/thread_starts,0]) - worm(modul, thread_starts, length, worm_bore, pressure_angle, lead_angle, together_built); - - if(show_spur) - translate([-r_gear,0,-width/2]) - rotate([0,0,gamma]) - spur_gear (modul, tooth_number, width, gear_bore, pressure_angle, -lead_angle, optimized); - } - else { - if(show_worm) - worm(modul, thread_starts, length, worm_bore, pressure_angle, lead_angle, together_built); - - if(show_spur) - translate([-2*r_gear,0,0]) - spur_gear (modul, tooth_number, width, gear_bore, pressure_angle, -lead_angle, optimized); - } -} - -//rack(modul=1, length=60, height=5, width=20, pressure_angle=20, helix_angle=0); - -//mountable_rack(modul=1, length=60, height=5, width=20, pressure_angle=20, helix_angle=0, profile=3, head="PH",fastners=3); - -//herringbone_rack(modul=1, length=60, height=5, width=20, pressure_angle=20, helix_angle=45); - -//mountable_herringbone_rack(modul=1, length=60, height=5, width=20, pressure_angle=20, helix_angle=45, profile=3, head="PH",fastners=3); - -//spur_gear (modul=1, tooth_number=30, width=5, bore=4, pressure_angle=20, helix_angle=20, optimized=true); - -//herringbone_gear (modul=1, tooth_number=30, width=5, bore=4, pressure_angle=20, helix_angle=30, optimized=true); - -//rack_and_pinion (modul=1, rack_length=50, gear_teeth=30, rack_height=4, gear_bore=4, width=5, pressure_angle=20, helix_angle=0, together_built=true, optimized=true); - -//ring_gear (modul=1, tooth_number=30, width=5, rim_width=3, pressure_angle=20, helix_angle=20); - -//herringbone_ring_gear (modul=1, tooth_number=30, width=5, rim_width=3, pressure_angle=20, helix_angle=30); - -//planetary_gear(modul=1, sun_teeth=16, planet_teeth=9, number_planets=5, width=5, rim_width=3, bore=4, pressure_angle=20, helix_angle=30, together_built=true, optimized=true); - -//bevel_gear(modul=1, tooth_number=30, partial_cone_angle=45, tooth_width=5, bore=4, pressure_angle=20, helix_angle=20); - -//bevel_herringbone_gear(modul=1, tooth_number=30, partial_cone_angle=45, tooth_width=5, bore=4, pressure_angle=20, helix_angle=30); - -//bevel_gear_pair(modul=1, gear_teeth=30, pinion_teeth=11, axis_angle=100, tooth_width=5, gear_bore=4, pinion_bore=4, pressure_angle = 20, helix_angle=20, together_built=true); - -//bevel_herringbone_gear_pair(modul=1, gear_teeth=30, pinion_teeth=11, axis_angle=100, tooth_width=5, gear_bore=4, pinion_bore=4, pressure_angle = 20, helix_angle=30, together_built=true); - -//worm(modul=1, thread_starts=2, length=15, bore=4, pressure_angle=20, lead_angle=10, together_built=true); - -//worm_gear(modul=1, tooth_number=30, thread_starts=2, width=8, length=20, worm_bore=4, gear_bore=4, pressure_angle=20, lead_angle=10, optimized=1, together_built=1, show_spur=1, show_worm=1); diff --git a/src/modules/info_ports/info_ports.ino b/src/modules/info_ports/info_ports.ino index 8469f54..603aeb5 100644 --- a/src/modules/info_ports/info_ports.ino +++ b/src/modules/info_ports/info_ports.ino @@ -1,30 +1,73 @@ -/* Example sketch to control a 28BYJ-48 stepper motor with ULN2003 driver board and Arduino UNO. More info: https://www.makerguides.com */ -// Include the Arduino Stepper.h library: #include -// Define number of steps per rotation: -const int stepsPerRevolution = 2048; -// Wiring: -// Pin 8 to IN1 on the ULN2003 driver -// Pin 9 to IN2 on the ULN2003 driver -// Pin 10 to IN3 on the ULN2003 driver -// Pin 11 to IN4 on the ULN2003 driver -// Create stepper object called 'myStepper', note the pin order: -Stepper myStepper = Stepper(stepsPerRevolution, 8, 10, 9, 11); -void setup() { - // Set the speed to 5 rpm: - myStepper.setSpeed(5); - - // Begin Serial communication at a baud rate of 9600: - Serial.begin(9600); +#include + +const int stepsPerRevolution = 2038; + +#define IN_ONE 2 +#define IN_TWO 3 +#define IN_THREE 5 +#define IN_FOUR 6 + +Stepper stepper = Stepper(stepsPerRevolution, IN_ONE, IN_THREE, IN_TWO, IN_FOUR); + +#define LIMIT_SWITCH_PIN 9 + +bool needs_calibration = false; +int calib_steps_to_do = 0; +int steps_to_do = 0; + +void updatemotor() { + if (calib_steps_to_do > 0) { + stepper.step(1); + calib_steps_to_do--; + } + else if (needs_calibration) { + if (digitalRead(LIMIT_SWITCH_PIN)) { + // Button not pushed down + stepper.step(1); + } else { + // Button pushed down for first time, will be at 0 within stepsPerRevolution/64 + needs_calibration = false; + } + } else { + if (steps_to_do > 0) { + stepper.step(1); + steps_to_do--; + } else { + digitalWrite(IN_ONE, LOW); + digitalWrite(IN_TWO, LOW); + digitalWrite(IN_THREE, LOW); + digitalWrite(IN_FOUR, LOW); + } + } } + +void setPosition(uint8_t index) { + needs_calibration = true; + int slotsToTurn = (16 - index) % 16; + steps_to_do = stepsPerRevolution/64 + (slotsToTurn*(stepsPerRevolution/16)); + if (!digitalRead(LIMIT_SWITCH_PIN)) { + calib_steps_to_do = stepsPerRevolution / 16; + } +} + +void setup() { + Serial.begin(115200); + stepper.setSpeed(5); + pinMode(LIMIT_SWITCH_PIN, INPUT_PULLUP); + obus_module::setup(OBUS_TYPE_INFO, 3); +} + +uint8_t port_position = 0; +obus_can::message message; void loop() { - // Step one revolution in one direction: - Serial.println("clockwise"); - myStepper.step(stepsPerRevolution); - delay(500); - - // Step one revolution in the other direction: - Serial.println("counterclockwise"); - myStepper.step(-stepsPerRevolution); - delay(500); + obus_module::loopInfo(&message, info_generator); + updatemotor(); +} + +int info_generator(uint8_t* buffer) { + uint8_t location = random(16); + buffer[0] = location; + setPosition(location); + return 1; } \ No newline at end of file diff --git a/src/modules/info_ports/info_ports.scad b/src/modules/info_ports/info_ports.scad index 10b067f..6af7a4f 100644 --- a/src/modules/info_ports/info_ports.scad +++ b/src/modules/info_ports/info_ports.scad @@ -17,7 +17,6 @@ eps=0.0001; outer_radius=40; // outer radius of inner cylinder (the one with holes) wall_thickness=2; -use ; gear_height=13; big_gear=30; @@ -74,6 +73,8 @@ module rotating_cylinder() { // http://sammy76.free.fr/conseils/electronique/arduino/SG90.php clearance=0.5; +size_outer = 2*(outer_radius+wall_thickness+clearance); + // Print upside-down module small_gear_cylinder() { @@ -97,7 +98,6 @@ distance_to_mount=22.7 - 15.9 - 2.5; module container() { translation_outer = -outer_radius - wall_thickness - clearance; - size_outer = 2*(outer_radius+wall_thickness+clearance); module clip_hole() { cube([clip_thickness+clearance, 100, 10+1]); translate([0, -clip_depth-clearance, 10]) cube([clip_thickness+clearance, 100, 10+clearance]); @@ -174,8 +174,6 @@ module clip(thickness=5, clip_depth=1) { } module container_bottom() { - - size_outer = 2*(outer_radius+wall_thickness+clearance); translate([0, -size_outer/2, 0]) { cube([size_outer, size_outer, wall_thickness]); } @@ -237,12 +235,13 @@ module ccube(size = [1,1,1], center = false) module keycap() { - difference() { + translate([0, 0, -1]) difference() { scale([12, 7, 15]) sphere(d=1); union() { ccube([cut, cut, cut], center=[true, true, false]); } } + rotate([0, 180, 0]) ccube([12, 7, 1], center=[1, 1, 0]); translate([-5.8/2, 0, 0]) ccube([1, 2.5, 3], center=[1, 1, 0]); translate([5.8/2, 0, 0]) ccube([1, 2.5, 3], center=[1, 1, 0]); } @@ -251,14 +250,25 @@ module keycap() { translation_outer = -outer_radius - wall_thickness - clearance; +module extracase() { + difference() { + ccube([size_outer, size_outer, 61.5], center=[1, 1, 0]); + translate([0, 0, 1.5]) ccube([size_outer-3, size_outer-3, cut], center=[1, 1, 0]); + translate([0, 0, -1]) cylinder(d=15, h=cut); + } + +} + /* rotating_cylinder(); */ /* translate([125, 0, 0]) container(); */ -small_gear_cylinder(); +// small_gear_cylinder(); /* translate([125 + translation_outer, 125, -wall_thickness]) container_bottom(); */ -// keycap(); \ No newline at end of file +// keycap(); + +extracase(); \ No newline at end of file