From 1cf79636a523233d68f618d762ba9459e2534ff3 Mon Sep 17 00:00:00 2001 From: M1dgard Date: Thu, 12 Jul 2018 22:58:44 +0200 Subject: [PATCH] [ncmpcpp] Add ncmpcpp config --- ncmpcpp/bindings | 537 ++++++++++++++++++++++++++++++++++++++++++++ ncmpcpp/config | 569 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 1106 insertions(+) create mode 100644 ncmpcpp/bindings create mode 100644 ncmpcpp/config diff --git a/ncmpcpp/bindings b/ncmpcpp/bindings new file mode 100644 index 0000000..20c65d7 --- /dev/null +++ b/ncmpcpp/bindings @@ -0,0 +1,537 @@ +##### General rules ##### +## +## 1) Because each action has runtime checks whether it's +## ok to run it, a few actions can be bound to one key. +## Actions will be bound in order given in configuration +## file. When a key is pressed, first action in order +## will test itself whether it's possible to run it. If +## test succeeds, action is executed and other actions +## bound to this key are ignored. If it doesn't, next +## action in order tests itself etc. +## +## 2) It's possible to bind more that one action at once +## to a key. It can be done using the following syntax: +## +## def_key "key" +## action1 +## action2 +## ... +## +## This creates a chain of actions. When such chain is +## executed, each action in chain is run until the end of +## chain is reached or one of its actions fails to execute +## due to its requirements not being met. If multiple actions +## and/or chains are bound to the same key, they will be +## consecutively run until one of them gets fully executed. +## +## 3) When ncmpcpp starts, bindings configuration file is +## parsed and then ncmpcpp provides "missing pieces" +## of default keybindings. If you want to disable some +## bindings, there is a special action called 'dummy' +## for that purpose. Eg. if you want to disable ability +## to crop playlists, you need to put the following +## into configuration file: +## +## def_key "C" +## dummy +## +## After that ncmpcpp will not bind any default action +## to this key. +## +## 4) To let you write simple macros, the following special +## actions are provided: +## +## - push_character "character" - pushes given special +## character into input queue, so it will be immediately +## picked by ncmpcpp upon next call to readKey function. +## Accepted values: mouse, up, down, page_up, page_down, +## home, end, space, enter, insert, delete, left, right, +## tab, ctrl-a, ctrl-b, ..., ctrl-z, ctrl-[, ctrl-\\, +## ctrl-], ctrl-^, ctrl-_, f1, f2, ..., f12, backspace. +## In addition, most of these names can be prefixed with +## alt-/ctrl-/shift- to be recognized with the appropriate +## modifier key(s). +## +## - push_characters "string" - pushes given string into +## input queue. +## +## - require_runnable "action" - checks whether given action +## is runnable and fails if it isn't. This is especially +## useful when mixed with previous two functions. Consider +## the following macro definition: +## +## def_key "key" +## push_characters "custom_filter" +## apply_filter +## +## If apply_filter can't be currently run, we end up with +## sequence of characters in input queue which will be +## treated just as we typed them. This may lead to unexpected +## results (in this case 'c' will most likely clear current +## playlist, 'u' will trigger database update, 's' will stop +## playback etc.). To prevent such thing from happening, we +## need to change above definition to this one: +## +## def_key "key" +## require_runnable "apply_filter" +## push_characters "custom_filter" +## apply_filter +## +## Here, first we test whether apply_filter can be actually run +## before we stuff characters into input queue, so if condition +## is not met, whole chain is aborted and we're fine. +## +## - require_screen "screen" - checks whether given screen is +## currently active. accepted values: browser, clock, help, +## media_library, outputs, playlist, playlist_editor, +## search_engine, tag_editor, visualizer, last_fm, lyrics, +## selected_items_adder, server_info, song_info, +## sort_playlist_dialog, tiny_tag_editor. +## +## - run_external_command "command" - runs given command using +## system() function. +## +## 5) In addition to binding to a key, you can also bind actions +## or chains of actions to a command. If it comes to commands, +## syntax is very similar to defining keys. Here goes example +## definition of a command: +## +## def_command "quit" [deferred] +## stop +## quit +## +## If you execute the above command (which can be done by +## invoking action execute_command, typing 'quit' and pressing +## enter), ncmpcpp will stop the player and then quit. Note the +## presence of word 'deferred' enclosed in square brackets. It +## tells ncmpcpp to wait for confirmation (ie. pressing enter) +## after you typed quit. Instead of 'deferred', 'immediate' +## could be used. Then ncmpcpp will not wait for confirmation +## (enter) and will execute the command the moment it sees it. +## +## Note: while command chains are executed, internal environment +## update (which includes current window refresh and mpd status +## update) is not performed for performance reasons. However, it +## may be desirable to do so in some situration. Therefore it's +## possible to invoke by hand by performing 'update enviroment' +## action. +## +## Note: There is a difference between: +## +## def_key "key" +## action1 +## +## def_key "key" +## action2 +## +## and +## +## def_key "key" +## action1 +## action2 +## +## First one binds two single actions to the same key whilst +## second one defines a chain of actions. The behavior of +## these two is different and is described in (1) and (2). +## +## Note: Function def_key accepts non-ascii characters. +## +##### List of unbound actions ##### +## +## The following actions are not bound to any key/command: +## +## - set_volume +## +# +#def_key "mouse" +# mouse_event +# +def_key "k" + scroll_up +# +#def_key "shift-up" +# select_item +# scroll_up +# +def_key "j" + scroll_down +# +#def_key "shift-down" +# select_item +# scroll_down +# +#def_key "[" +# scroll_up_album +# +#def_key "]" +# scroll_down_album +# +#def_key "{" +# scroll_up_artist +# +#def_key "}" +# scroll_down_artist +# +#def_key "page_up" +# page_up +# +#def_key "page_down" +# page_down +# +def_key "g" + move_home +# +def_key "G" + move_end +# +#def_key "insert" +# select_item +# +def_key "enter" + enter_directory +# +def_key "enter" + toggle_output +# +def_key "enter" + run_action +# +def_key "enter" + play_item +# +def_key "a" + add_item_to_playlist +# +#def_key "space" +# toggle_lyrics_update_on_song_change +# +def_key "v" + toggle_visualization_type +# +def_key "x" + delete_playlist_items +# +def_key "x" + delete_browser_items +# +def_key "x" + delete_stored_playlist +# +def_key "l" + next_column +# +def_key "l" + slave_screen +# +#def_key "right" +# volume_up +# +#def_key "+" +# volume_up +# +def_key "h" + previous_column +# +def_key "h" + master_screen +# +#def_key "left" +# volume_down +# +#def_key "-" +# volume_down +# +#def_key ":" +# execute_command +# +#def_key "tab" +# next_screen +# +#def_key "shift-tab" +# previous_screen +# +def_key "?" + show_help +# +def_key "p" + show_playlist +# +#def_key "b" +# show_browser +# +#def_key "b" +# change_browse_mode +# +def_key "s" + show_search_engine +# +def_key "s" + reset_search_engine +# +def_key "m" + show_media_library +# +def_key "m" + toggle_media_library_columns_mode +# +def_key "p" + show_playlist_editor +# +def_key "t" + show_tag_editor +# +def_key "o" + show_outputs +# +def_key "v" + show_visualizer +# +#def_key "=" +# show_clock +# +#def_key "@" +# show_server_info +# +def_key "S" + stop +# +def_key "space" + pause +# +#def_key ">" +# next +# +#def_key "<" +# previous +# +#def_key "ctrl-h" +# jump_to_parent_directory +# +#def_key "ctrl-h" +# replay_song +# +#def_key "backspace" +# jump_to_parent_directory +# +#def_key "backspace" +# replay_song +# +def_key "right" + seek_forward +# +def_key "left" + seek_backward +# +#def_key "r" +# toggle_repeat +# +#def_key "z" +# toggle_random +# +#def_key "y" +# save_tag_changes +# +#def_key "y" +# start_searching +# +#def_key "y" +# toggle_single +# +#def_key "R" +# toggle_consume +# +#def_key "Y" +# toggle_replay_gain_mode +# +#def_key "T" +# toggle_add_mode +# +#def_key "|" +# toggle_mouse +# +#def_key "#" +# toggle_bitrate_visibility +# +#def_key "Z" +# shuffle +# +#def_key "x" +# toggle_crossfade +# +#def_key "X" +# set_crossfade +# +#def_key "u" +# update_database +# +#def_key "ctrl-s" +# sort_playlist +# +#def_key "ctrl-s" +# toggle_browser_sort_mode +# +#def_key "ctrl-s" +# toggle_media_library_sort_mode +# +#def_key "ctrl-r" +# reverse_playlist +# +#def_key "ctrl-f" +# apply_filter +# +#def_key "ctrl-_" +# select_found_items +# +#def_key "/" +# find +# +#def_key "/" +# find_item_forward +# +#def_key "?" +# find +# +#def_key "?" +# find_item_backward +# +#def_key "." +# next_found_item +# +#def_key "," +# previous_found_item +# +#def_key "w" +# toggle_find_mode +# +#def_key "e" +# edit_song +# +#def_key "e" +# edit_library_tag +# +#def_key "e" +# edit_library_album +# +#def_key "e" +# edit_directory_name +# +#def_key "e" +# edit_playlist_name +# +#def_key "e" +# edit_lyrics +# +#def_key "i" +# show_song_info +# +#def_key "I" +# show_artist_info +# +#def_key "g" +# jump_to_position_in_song +# +def_key "l" + show_lyrics +# +def_key "V" + select_range +# +def_key "i" + reverse_selection +# +def_key "escape" + remove_selection +# +#def_key "B" +# select_album +# +#def_key "a" +# add_selected_items +# +#def_key "c" +# clear_playlist +# +#def_key "c" +# clear_main_playlist +# +#def_key "C" +# crop_playlist +# +#def_key "C" +# crop_main_playlist +# +def_key "alt-k" + move_sort_order_up +# +def_key "alt-k" + move_selected_items_up +# +def_key "alt-j" + move_sort_order_down +# +def_key "alt-j" + move_selected_items_down +# +#def_key "M" +# move_selected_items_to +# +#def_key "A" +# add +# +#def_key "S" +# save_playlist +# +#def_key "o" +# jump_to_playing_song +# +#def_key "G" +# jump_to_browser +# +#def_key "G" +# jump_to_playlist_editor +# +#def_key "~" +# jump_to_media_library +# +#def_key "E" +# jump_to_tag_editor +# +#def_key "U" +# toggle_playing_song_centering +# +#def_key "P" +# toggle_display_mode +# +#def_key "\\" +# toggle_interface +# +#def_key "!" +# toggle_separators_between_albums +# +#def_key "L" +# toggle_lyrics_fetcher +# +#def_key "F" +# fetch_lyrics_in_background +# +#def_key "alt-l" +# toggle_fetching_lyrics_in_background +# +#def_key "ctrl-l" +# toggle_screen_lock +# +#def_key "`" +# toggle_library_tag_type +# +#def_key "`" +# refetch_lyrics +# +#def_key "`" +# add_random_items +# +#def_key "ctrl-p" +# set_selected_items_priority +# +#def_key "q" +# quit +# diff --git a/ncmpcpp/config b/ncmpcpp/config new file mode 100644 index 0000000..4010b2b --- /dev/null +++ b/ncmpcpp/config @@ -0,0 +1,569 @@ +##### directories ###### +## +## Directory for storing ncmpcpp related files. Changing it is useful if you +## want to store everything somewhere else and provide command line setting for +## alternative location to config file which defines that while launching +## ncmpcpp. +## +# +#default: ncmpcpp_directory = ~/.ncmpcpp +ncmpcpp_directory = ~/.local/share/ncmpcpp +# +## +## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other +## MPD clients (eg. ncmpc) also use that location. +## +# +#lyrics_directory = ~/.lyrics +# +##### connection settings ##### +# +#mpd_host = +# +#mpd_port = +# +#mpd_connection_timeout = 5 +# +## Needed for tag editor and file operations to work. +## +mpd_music_dir = ~/mus +# +#mpd_crossfade_time = 5 +# +##### music visualizer ##### +## +## Note: In order to make music visualizer work you'll need to use mpd fifo +## output, whose format parameter has to be set to 44100:16:1 for mono +## visualization or 44100:16:2 for stereo visualization. Example configuration +## (it has to be put into mpd.conf): +## +## audio_output { +## type "fifo" +## name "Visualizer feed" +## path "/tmp/mpd.fifo" +## format "44100:16:2" +## } +## +# +visualizer_fifo_path = /tmp/mpd.fifo +# +## +## Note: Below parameter is needed for ncmpcpp to determine which output +## provides data for visualizer and thus allow syncing between visualization and +## sound as currently there are some problems with it. +## +# +visualizer_output_name = my_fifo +# +## +## If you set format to 44100:16:2, make it 'yes'. +## +visualizer_in_stereo = yes +# +## +## Note: Below parameter defines how often ncmpcpp has to "synchronize" +## visualizer and audio outputs. 30 seconds is optimal value, but if you +## experience synchronization problems, set it to lower value. Keep in mind +## that sane values start with >=10. +## +# +#visualizer_sync_interval = 30 +# +## +## Note: To enable spectrum frequency visualization you need to compile ncmpcpp +## with fftw3 support. +## +# +## Available values: spectrum, wave, wave_filled, ellipse. +## +visualizer_type = spectrum +# +#default: visualizer_look = ●▮ +visualizer_look = ── +# +#visualizer_color = blue, cyan, green, yellow, magenta, red +# +## Alternative subset of 256 colors for terminals that support it. +## +#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 +visualizer_color = 144 +# +##### system encoding ##### +## +## ncmpcpp should detect your charset encoding but if it failed to do so, you +## can specify charset encoding you are using here. +## +## Note: You can see whether your ncmpcpp build supports charset detection by +## checking output of `ncmpcpp --version`. +## +## Note: Since MPD uses UTF-8 by default, setting this option makes sense only +## if your encoding is different. +## +# +#system_encoding = "" +# +##### delays ##### +# +## Time of inactivity (in seconds) after playlist highlighting will be disabled +## (0 = always on). +## +#playlist_disable_highlight_delay = 5 +playlist_disable_highlight_delay = 2 +# +## Defines how long messages are supposed to be visible. +## +#message_delay_time = 5 +message_delay_time = 3 +# +##### song format ##### +## +## For a song format you can use: +## +## %l - length +## %f - filename +## %D - directory +## %a - artist +## %A - album artist +## %t - title +## %b - album +## %y - date +## %n - track number (01/12 -> 01) +## %N - full track info (01/12 -> 01/12) +## %g - genre +## %c - composer +## %p - performer +## %d - disc +## %C - comment +## %P - priority +## $R - begin right alignment +## +## If you want to make sure that a part of the format is displayed only when +## certain tags are present, you can archieve it by grouping them with brackets, +## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are +## present or '' otherwise. It is also possible to define a list of +## alternatives by providing several groups and separating them with '|', +## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is +## not present. +## +## Note: If you want to set limit on maximal length of a tag, just put the +## appropriate number between % and character that defines tag type, e.g. to +## make album take max. 20 terminal cells, use '%20b'. +## +## In addition, formats support markers used for text attributes. They are +## followed by character '$'. After that you can put: +## +## - 0 - default window color (discards all other colors) +## - 1 - black +## - 2 - red +## - 3 - green +## - 4 - yellow +## - 5 - blue +## - 6 - magenta +## - 7 - cyan +## - 8 - white +## - 9 - end of current color +## - b - bold text +## - u - underline text +## - r - reverse colors +## - a - use alternative character set +## +## If you don't want to use a non-color attribute anymore, just put it again, +## but this time insert character '/' between '$' and attribute character, +## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with +## reversed colors. +## +## If you want to use 256 colors and/or background colors in formats (the naming +## scheme is described below in section about color definitions), it can be done +## with the syntax $(COLOR), e.g. to set the artist tag to one of the +## non-standard colors and make it have yellow background, you need to write +## $(197_yellow)%a$(end). Note that for standard colors this is interchangable +## with attributes listed above. +## +## Note: colors can be nested. +## +# +#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9} +# +#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f} +# +#song_library_format = {%n - }{%t}|{%f} +# +#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b +alternative_header_first_line_format = $1$aqqu$/a$9 $b{{%t}|{%f}}$/b$(243){ (%y)}$9 $1$atqq$/a$9 +# +# +#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} +alternative_header_second_line_format = {{{$7%b$9 $3#%n$9 }|{from $7%b$9}}{by $4%a$9}}|{%D} +# +#current_item_prefix = $(yellow)$r +# +#current_item_suffix = $/r$(end) +# +#current_item_inactive_column_prefix = $(white)$r +# +#current_item_inactive_column_suffix = $/r$(end) +# +#now_playing_prefix = $b +# +#now_playing_suffix = $/b +# +#browser_playlist_prefix = "$2playlist$9 " +# +#selected_item_prefix = $6 +selected_item_prefix = $6[ +# +#selected_item_suffix = $9 +selected_item_suffix = ]$9 +# +#modified_item_prefix = $3> $9 +# +## +## Note: attributes are not supported for the following variables. +## +#song_window_title_format = {%a - }{%t}|{%f} +## +## Note: Below variables are used for sorting songs in browser. The sort mode +## determines how songs are sorted, and can be used in combination with a sort +## format to specify a custom sorting format. Available values for +## browser_sort_mode are "name", "mtime", "format" and "noop". +## +# +#browser_sort_mode = name +# +#browser_sort_format = {%a - }{%t}|{%f} {(%l)} +# +##### columns settings ##### +## +## syntax of song columns list format is "column column etc." +## +## - syntax for each column is: +## +## (width of the column)[color of the column]{displayed tag} +## +## Note: Width is by default in %, if you want a column to have fixed size, add +## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of +## screen (so the real width will depend on actual screen size), whereas +## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen +## is. +## +## - color is optional (if you want the default one, leave the field empty). +## +## Note: You can give a column additional attributes by putting appropriate +## character after displayed tag character. Available attributes are: +## +## - r - column will be right aligned +## - E - if tag is empty, empty tag marker won't be displayed +## +## You can also: +## +## - give a column custom name by putting it after attributes, separated with +## character ':', e.g. {lr:Length} gives you right aligned column of lengths +## named "Length". +## +## - define sequence of tags, that have to be displayed in case predecessor is +## empty in a way similar to the one in classic song format, i.e. using '|' +## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to +## display artist tag and then composer and performer if previous ones are not +## available. +## +# +#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} +song_columns_list_format = (20)[cyan]{brE} (5f)[green]{NE} (20)[yellow]{arE} (1)[]{} (7f)[magenta]{lr} (2)[white]{} (40)[white]{t|f:Title} +# +##### various settings ##### +# +## +## Note: Custom command that will be executed each time song changes. Useful for +## notifications etc. +## +#execute_on_song_change = notify-send "Now playing %t" "{by %a} {from %b}" +# +## +## Note: Custom command that will be executed each time player state +## changes. The environment variable MPD_PLAYER_STATE is set to the current +## state (either unknown, play, pause, or stop) for its duration. +## +# +#execute_on_player_state_change = "" +# +#playlist_show_mpd_host = no +# +#playlist_show_remaining_time = no +playlist_show_remaining_time = yes +# +#playlist_shorten_total_times = no +# +#playlist_separate_albums = no +# +## +## Note: Possible display modes: classic, columns. +## +#playlist_display_mode = columns +# +#browser_display_mode = classic +browser_display_mode = columns +# +#search_engine_display_mode = classic +search_engine_display_mode = columns +# +#playlist_editor_display_mode = classic +playlist_editor_display_mode = columns +# +#discard_colors_if_item_is_selected = yes +# +#show_duplicate_tags = yes +# +#incremental_seeking = yes +# +#seek_time = 1 +# +#volume_change_step = 2 +# +#autocenter_mode = no +autocenter_mode = yes +# +#centered_cursor = no +centered_cursor = yes +# +## +## Note: You can specify third character which will be used to build 'empty' +## part of progressbar. +## +#progressbar_look = => +progressbar_look = ──╶ +# +## Available values: database, playlist. +## +#default_place_to_search_in = database +# +## Available values: classic, alternative. +## +#user_interface = classic +user_interface = alternative +# +#data_fetching_delay = yes +# +## Available values: artist, album_artist, date, genre, composer, performer. +## +#media_library_primary_tag = artist +media_library_primary_tag = album_artist +# +#media_library_albums_split_by_date = yes +# +## Available values: wrapped, normal. +## +#default_find_mode = wrapped +# +#default_tag_editor_pattern = %n - %t +# +#header_visibility = yes +header_visibility = no +# +#statusbar_visibility = yes +# +#titles_visibility = yes +titles_visibility = no +# +#header_text_scrolling = yes +# +#cyclic_scrolling = no +# +#lines_scrolled = 2 +# +#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet +# +#follow_now_playing_lyrics = no +follow_now_playing_lyrics = yes +# +#fetch_lyrics_for_current_song_in_background = no +# +store_lyrics_in_song_dir = yes +# +#generate_win32_compatible_filenames = yes +# +#allow_for_physical_item_deletion = no +# +## +## Note: If you set this variable, ncmpcpp will try to get info from last.fm in +## language you set and if it fails, it will fall back to english. Otherwise it +## will use english the first time. +## +## Note: Language has to be expressed as an ISO 639 alpha-2 code. +## +#lastfm_preferred_language = en +# +#space_add_mode = add_remove +# +#show_hidden_files_in_local_browser = no +# +## +## How shall screen switcher work? +## +## - "previous" - switch between the current and previous screen. +## - "screen1,...,screenN" - switch between given sequence of screens. +## +## Screens available for use: help, playlist, browser, search_engine, +## media_library, playlist_editor, tag_editor, outputs, visualizer, clock, +## lyrics, last_fm. +## +#screen_switcher_mode = playlist, browser +# +## +## Note: You can define startup screen by choosing screen from the list above. +## +#startup_screen = playlist +# +## +## Note: You can define startup slave screen by choosing screen from the list +## above or an empty value for no slave screen. +## +#startup_slave_screen = "" +# +#startup_slave_screen_focus = no +# +## +## Default width of locked screen (in %). Acceptable values are from 20 to 80. +## +# +#locked_screen_width_part = 50 +# +#ask_for_locked_screen_width_part = yes +# +#jump_to_now_playing_song_at_start = yes +# +#ask_before_clearing_playlists = yes +# +#clock_display_seconds = no +# +#display_volume_level = yes +# +#display_bitrate = no +# +#display_remaining_time = no +# +## Available values: none, basic, extended, perl. +## +#regular_expressions = perl +# +## +## Note: if below is enabled, ncmpcpp will ignore leading "The" word while +## sorting items in browser, tags in media library, etc. +## +#ignore_leading_the = no +ignore_leading_the = yes +# +## +## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and +## filtering lists. This takes an effect only if boost was compiled with ICU +## support. +## +#ignore_diacritics = no +ignore_diacritics = yes +# +#block_search_constraints_change_if_items_found = yes +# +#mouse_support = yes +mouse_support = no +# +#mouse_list_scroll_whole_page = yes +# +#empty_tag_marker = +# +#tags_separator = " | " +# +#tag_editor_extended_numeration = no +# +#media_library_sort_by_mtime = no +# +#enable_window_title = yes +# +## +## Note: You can choose default search mode for search engine. Available modes +## are: +## +## - 1 - use mpd built-in searching (no regexes, pattern matching) +## +## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but +## if your mpd is on a remote machine, downloading big database to process +## it can take a while +## +## - 3 - match only exact values (this mode uses mpd function for searching in +## database and local one for searching in current playlist) +## +# +#search_engine_default_search_mode = 1 +# +#external_editor = nano +external_editor = vi +# +## Note: set to yes if external editor is a console application. +## +#use_console_editor = yes +# +##### colors definitions ##### +## +## It is possible to set a background color by setting a color value +## "_", e.g. red_black will set foregound color to red +## and background color to black. +## +## In addition, for terminals that support 256 colors it is possible to set one +## of them by using a number in range [1, 256] instead of color name, +## e.g. numerical value corresponding to red_black is 2_1. To find out if the +## terminal supports 256 colors, run ncmpcpp and check out the bottom of the +## help screen for list of available colors and their numerical values. +## +## What is more, there are two special values for the background color: +## "transparent" and "current". The first one explicitly sets the background to +## be transparent, while the second one allows you to preserve current +## background color and change only the foreground one. It's used implicitly +## when background color is not specified. +## +## Moreover, it is possible to attach format information to selected color +## variables by appending to their end a colon followed by one or more format +## flags, e.g. black:b or red:ur. The following variables support this syntax: +## visualizer_color, color1, color2, empty_tag_color, volume_color, +## state_line_color, state_flags_color, progressbar_color, +## progressbar_elapsed_color, player_state_color, statusbar_time_color, +## alternative_ui_separator_color. +## +## Note: due to technical limitations of older ncurses version, if 256 colors +## are used there is a possibility that you'll be able to use only colors with +## transparent background. +# +#colors_enabled = yes +# +#empty_tag_color = cyan +# +#header_window_color = default +# +#volume_color = default +# +#state_line_color = default +# +#state_flags_color = default:b +# +#main_window_color = yellow +main_window_color = white +# +#color1 = white +# +#color2 = green +# +#progressbar_color = black:b +# +#progressbar_elapsed_color = green:b +progressbar_elapsed_color = white +# +#statusbar_color = default +# +#statusbar_time_color = default:b +# +#player_state_color = default:b +# +#alternative_ui_separator_color = black:b +alternative_ui_separator_color = black +# +#window_border_color = green +# +#active_window_border = red +#