In a tagrendering, some special values are substituted by an advanced UI-element. This allows advanced features and visualizations to be reused by custom themes or even to query third-party API's.
General usage is `{func_name()}`, `{func_name(arg, someotherarg)}` or `{func_name(args):cssStyle}`. Note that you _do not_ need to use quotes around your arguments, the comma is enough to separate them. This also implies you cannot use a comma in your args
Instead of using `{"render": {"en": "{some_special_visualisation(some_arg, some other really long message, more args)} , "nl": "{some_special_visualisation(some_arg, een boodschap in een andere taal, more args)}}`, one can also write
`{
"render": {
"special": {
"type": "some_special_visualisation",
"before": {
"en": "Some text to prefix before the special element (e.g. a title)",
"nl": "Een tekst om voor het element te zetten (bv. een titel)"
},
"after": {
"en": "Some text to put after the element, e.g. a footer"
featureId | _undefined_ | The key of the attribute which contains the id of the feature from which to use the tags
tagRenderingId | _undefined_ | The layer-id and tagRenderingId to render. Can be multiple value if ';'-separated (in which case every value must also contain the layerId, e.g. `layerId.tagRendering0; layerId.tagRendering1`). Note: this can cause layer injection
zoomlevel | 18 | The (maximum) zoomlevel: the target zoomlevel after fitting the entire feature. The minimap will fit the entire feature, then zoom out to this zoom level. The higher, the more zoomed in with 1 being the entire world and 19 being really close
idKey | id | (Matches all resting arguments) This argument should be the key of a property of the feature. The corresponding value is interpreted as either the id or the a list of ID's. The features with these ID's will be shown on this minimap. (Note: if the key is 'id', list interpration is disabled)
A small map showing _only one side_ the selected feature. *This features requires to have linerenderings with offset* as only linerenderings with a postive or negative offset will be shown. Note: in most cases, this map will be automatically introduced
feature_ids | _undefined_ | A JSON-serialized list of IDs of features to apply the tagging on
keys | _undefined_ | One key (or multiple keys, seperated by ';') of the attribute that should be copied onto the other features.
text | _undefined_ | The text to show on the button
autoapply | _undefined_ | A boolean indicating wether this tagging should be applied automatically if the relevant tags on this object are changed. A visual element indicating the multi_apply is still shown
overwrite | _undefined_ | If set to 'true', the tags on the other objects will always be overwritten. The default behaviour will be to only change the tags on other objects if they are either undefined or had the same value before the change
{multi_apply(_features_with_the_same_name_within_100m, name:etymology:wikidata;name:etymology, Apply etymology information on all nearby objects with the same name)}
Sends the images linked to the current object to plantnet.org and asks it what plant species is shown on it. The user can then select the correct species; the corresponding wikidata-identifier will then be added to the object (together with `source:species:wikidata=plantnet.org AI`).
image_key | image,mapillary,image,wikidata,wikimedia_commons,image,image | The keys given to the images, e.g. if <spanclass='literal-code'>image</span> is given, the first picture URL will be added as <spanclass='literal-code'>image</span>, the second as <spanclass='literal-code'>image:0</span>, the third as <spanclass='literal-code'>image:1</span>, etc... Multiple values are allowed if ';'-separated
The argument `tags` of the import button takes a `;`-seperated list of tags to add (or the name of a property which contains a JSON-list of properties).
Remark that the syntax is slightly different then expected; it uses '$' to note a value to copy, followed by a name (matched with `[a-zA-Z0-9_:]*`). Sadly, delimiting with `{}` as these already mark the boundaries of the special rendering...
targetLayer | _undefined_ | The id of the layer where this point should end up. This is not very strict, it will simply result in checking that this layer is shown preventing possible duplicate elements
tags | _undefined_ | The tags to add onto the new object - see specification above. If this is a key (a single word occuring in the properties of the object), the corresponding value is taken and expanded instead
snap_onto_layers | _undefined_ | If a way of the given layer(s) is closeby, will snap the new point onto this way (similar as preset might snap). To show multiple layers to snap onto, use a `;`-seperated list
max_snap_distance | 5 | The maximum distance that the imported point will be moved to snap onto a way in an already existing layer (in meters). This is previewed to the contributor, similar to the 'add new point'-action of MapComplete
location_picker | photo | Chooses the background for the precise location picker, options are 'map', 'photo' or 'osmbasedmap' or 'none' if the precise input picker should be disabled
The argument `tags` of the import button takes a `;`-seperated list of tags to add (or the name of a property which contains a JSON-list of properties).
Remark that the syntax is slightly different then expected; it uses '$' to note a value to copy, followed by a name (matched with `[a-zA-Z0-9_:]*`). Sadly, delimiting with `{}` as these already mark the boundaries of the special rendering...
targetLayer | _undefined_ | The id of the layer where this point should end up. This is not very strict, it will simply result in checking that this layer is shown preventing possible duplicate elements
tags | _undefined_ | The tags to add onto the new object - see specification above. If this is a key (a single word occuring in the properties of the object), the corresponding value is taken and expanded instead
max_snap_distance | 0.05 | If the imported object is a LineString or (Multi)Polygon, already existing OSM-points will be reused to construct the geometry of the newly imported way
This button will modify the geometry of an existing OSM way to match the specified geometry. This can conflate OSM-ways with LineStrings and Polygons (only simple polygons with one single ring). An attempt is made to move points with special values to a decent new location (e.g. entrances)
Note that the contributor must zoom to at least zoomlevel 18 to be able to use this functionality.
It is only functional in official themes, but can be tested in unoffical themes.
The argument `tags` of the import button takes a `;`-seperated list of tags to add (or the name of a property which contains a JSON-list of properties).
Remark that the syntax is slightly different then expected; it uses '$' to note a value to copy, followed by a name (matched with `[a-zA-Z0-9_:]*`). Sadly, delimiting with `{}` as these already mark the boundaries of the special rendering...
targetLayer | _undefined_ | The id of the layer where this point should end up. This is not very strict, it will simply result in checking that this layer is shown preventing possible duplicate elements
tags | _undefined_ | The tags to add onto the new object - see specification above. If this is a key (a single word occuring in the properties of the object), the corresponding value is taken and expanded instead
Remark that the syntax is slightly different then expected; it uses '$' to note a value to copy, followed by a name (matched with `[a-zA-Z0-9_:]*`). Sadly, delimiting with `{}` as these already mark the boundaries of the special rendering...
id_of_object_to_apply_this_one | _undefined_ | If specified, applies the the tags onto _another_ object. The id will be read from properties[id_of_object_to_apply_this_one] of the selected object. The tags are still calculated based on the tags of the _selected_ element
#### Example usage of tag_apply
`{tag_apply(survey_date=$_now:date, Surveyed today!)}`, `{tag_apply(addr:street=$addr:street, Apply the address, apply_icon.svg, _closest_osm_id)
A component showing nearby images loaded from various online services such as Mapillary. In edit mode and when used on a feature, the user can select an image to add to the feature
key | _undefined_ | What key to use, e.g. `language`, `tactile_writing:braille:language`, ... If a language is supported, the language code will be appended to this key, resulting in `language:nl=yes` if nl is picked
question | _undefined_ | What to ask if no questions are known
render_list_item | {language()} | How a single language will be shown in the list of languages. Use `{language}` to indicate the language (which it must contain).
render_single_language | _undefined_ | What will be shown if the feature only supports a single language
render_all | {list()} | The full rendering. Use `{list}` to show where the list of languages must come. Optional if mode=single
no_known_languages | _undefined_ | The text that is shown if no languages are known for this key. If this text is omitted, the languages will be prompted instead
mode | multi | If one or many languages can be selected. Should be 'multi' or 'single'
Creates an image carousel for the given sources. An attempt will be made to guess what source is used. Supported: Wikidata identifiers, Wikipedia pages, Wikimedia categories, IMGUR (with attribution, direct links)
image_key | image,mapillary,image,wikidata,wikimedia_commons,image,image | The keys given to the images, e.g. if <spanclass='literal-code'>image</span> is given, the first picture URL will be added as <spanclass='literal-code'>image</span>, the second as <spanclass='literal-code'>image:0</span>, the third as <spanclass='literal-code'>image:1</span>, etc... Multiple values are allowed if ';'-separated
keyToShowWikipediaFor | wikidata;wikipedia | Use the wikidata entry from this key to show the wikipedia article for. Multiple keys can be given (separated by ';'), in which case the first matching value is used
`{wikipedia()}` is a basic example, `{wikipedia(name:etymology:wikidata)}` to show the wikipedia page of whom the feature was named after. Also remember that these can be styled, e.g. `{wikipedia():max-height: 10rem}` to limit the height
Adds an overview of the mangrove-reviews of this object. Mangrove.Reviews needs - in order to identify the reviewed object - a coordinate and a name. By default, the name of the object is given, but this can be overwritten
`{reviews()}` for a vanilla review, `{reviews(name, play_forest)}` to review a play forest. If a name is known, the name will be used as identifier, otherwise 'play_forest' is used
A normal opening hours table can be invoked with `{opening_hours_table()}`. A table for e.g. conditional access with opening hours can be `{opening_hours_table(access:conditional, no @ &LPARENS, &RPARENS)}`
### live
Downloads a JSON from the given URL, e.g. '{live(example.org/data.json, shorthand:x.y.z, other:a.b.c, shorthand)}' will download the given file, will create an object {shorthand: json[x][y][z], other: json[a][b][c] out of it and will return 'other' or 'json[a][b][c]. This is made to use in combination with tags, e.g. {live({url}, {url:format}, needed_value)}
name | default | description
------ | --------- | -------------
Url | _undefined_ | The URL to load
Shorthands | _undefined_ | A list of shorthands, of the format 'shorthandname:path.path.path'. separated by ;
path | _undefined_ | The path (or shorthand) that should be returned
Converts a short, canonical value into the long, translated text including the unit. This only works if a `unit` is defined for the corresponding value. The unit specification will be included in the text.
Creates a `mailto`-link where some fields are already set and correctly escaped. The user will be promted to send the email
name | default | description
------ | --------- | -------------
to | _undefined_ | Who to send the email to?
subject | _undefined_ | The subject of the email
body | _undefined_ | The text in the email
button_text | _undefined_ | The text shown on the button in the UI
#### Example usage of send_email
`{send_email(,,,)}`
### multi
Given an embedded tagRendering (read only) and a key, will read the keyname as a JSON-list. Every element of this list will be considered as tags and rendered with the tagRendering
name | default | description
------ | --------- | -------------
key | _undefined_ | The property to read and to interpret as a list of properties
tagrendering | _undefined_ | An entire tagRenderingConfig
#### Example usage of multi
```json
{
"render": {
"special": {
"type": "multi",
"key": "_doors_from_building_properties",
"tagRendering": {
"render": "The building containing this feature has a <ahref='#{id}'>door</a> of width {entrance:width}"
- A target layer with features for which an action is defined in a tag rendering. The following special visualisations support an autoAction: import_way_button, tag_apply
- A host feature to place the auto-action on. This can be a big outline (such as a city). Another good option for this is the layer
- [current_view](./BuiltinLayers.md#current_view)
- Then, use a calculated tag on the host feature to determine the overlapping object ids
tag_rendering_id | _undefined_ | The ID of the tagRendering containing the autoAction. This tagrendering will be calculated. The embedded actions will be executed
